The first time you see the AVENGER SHUTTLE, its clean lines and fully integrated cable routing immediately convey a sense of speed and purpose. As detailed on our product page, the SHUTTLE features a new aero tube design—from the head tube and down tube to the seat tube and stays—every angle is engineered to cut through the wind.
However, the true performance of an exceptional machine comes not only from its design but from a precision, safe setup. That's exactly why we’ve prepared this "official manual" blog post. It’s the critical bridge between owning the SHUTTLE and truly mastering it.
📖 Your Complete SHUTTLE Manual: From Unboxing to the Open Road
We've compiled the official user manual for the SHUTTLE. It covers every technical detail, from frame geometry and accessory lists to complete cable routing guides for both Di2 electronic and mechanical groupsets.
Click Here to Download the Full AVENGER SHUTTLE User Manual (PDF)
This manual is your single most important reference for installation and maintenance. We strongly recommend saving it to your phone or computer for easy access.
🔧 Key Installation Tips & How to Avoid Common Pitfalls
To help you get started on the right foot, we've highlighted a few critical points from the manual that builders ask about most:
1. Frame Compatibility Essentials (Manual Page 11)
The SHUTTLE is designed for high performance with modern standards. Please note:
Thru-Axles: Front is 100x12mm, Rear is 142x12mm.
Tire Clearance: Officially supports tires up to 700x32C. This allows for increased comfort and grip. After installation, always verify a minimum 4mm clearance between the tire and the frame/fork.
2. The "Golden Rule" of Seatpost Installation (Manual Pages 12-13)
Carbon seatposts require meticulous care. Incorrect installation can damage the frame or post.
Assembly Paste & Torque: Always apply carbon assembly paste to the areas of the seatpost that contact the frame (indicated as ① in the manual). Use a torque wrench to tighten the clamp bolt(s) to the specified 6Nm.
Insertion Depth: Each frame size has a minimum and maximum insertion depth requirement. If you need to cut the seatpost, you must cut it perfectly perpendicular. Because the original depth markings will be lost, you must re-measure to ensure the new depth meets the manual's specifications.
3. Handlebar Installation: Precision for Control (Manual Page 15)
Proper installation of the ICON integrated handlebar is vital for safe and precise handling.
Procedure: Insert the handlebar into the steerer tube, ensuring it's centered. Tighten the top cap bolt (4Nm) to pre-load the headset and remove any play. Finally, tighten the stem bolts (4Nm) evenly.
Final Check: After installation, ensure there are no gaps between the stem, spacers, headset, and frame. The handlebar should turn smoothly with no binding or play.
When you're ready to experience this perfect blend of lightness, stiffness, and speed for yourself, click below to explore the SHUTTLE in detail.
👉 Explore the AVENGER SHUTTLE Carbon Road Bike Frame 👈
On the product page, you can dive into the full specifications: the ultra-light Toray T800/T1000 carbon construction (a 50cm frame weighing just 764g±20g!), the UCI approval, and real-world video reviews from cyclists in Spain and beyond.
Choose the SHUTTLE. Choose uncompromising speed. Keep moving. Never stop.
